VARIO - Remote Control

VARIO - Remote Control


 

39.20

VAR-RC-V1
+
REMOTE Instructions:

VARIO - Remote Control



REMOTE CONTROL USABLE ON ALL VARIO SERIES EXCEPT FOR THE "IP PoE" VARIOs.
ONLY ONE REMOTE CONTROL NEEDED WHATEVER THE QUANTITY OF VARIOS INSTALLED.

OVERVIEW

The VARIO remote control is an optional hand held device for the operation and adjustment of all VARIO illuminators. It allows for quick and safe set up from ground level, reducing both cost and time of installation and commissioning. It provides access to a range of advanced features allowing installers to programme bespoke lighting actions to meet the exact needs of the site including: power adjust, photocell sensitivity adjust, remote switching, timer function, remote dimming and more.

KEY FEATURES

VARIO Remote Control
Control and Adjust any VARIO illuminator
Easy, safe setup from ground level
Access to advanced lighting settings

SPECIFICATIONS

Power Adjust: 100%, 80%, 60%, 40% and 20%
Photocell Sensitivity:
25 Lux On 50 Lux Off,
10 Lux On 30 Lux Off,
5 Lux On 15 Lux Off,
or Disable photocell
Telemetry Input: Volt free of TTL input for remote switching or remote dimming
Timer Fucntion: 30 mins, 10 mins, 3 mins, 1 min or timer disabled
(used for remote lighting activation period upon remote switching)
LED Status Indicators on/off
Restore Factory Settings
Disable Remote Control Set-up

Dimensions: 40 x 87 x 7.5 mm
Weight: 10g
Battery: CR2025
None
VARIO - Technical video :



VARIO2 - Next Generation Illumination :



VARIO - Go the Distance :